www.megger.com
PAT400 Series
62
Expert options
Expert Options appears as a check box when creating or managing accounts.
By ticking the “Expert options” on an account, the operator gets access to the following:
Switching ON or OFF the “Expert Mode”
Switching ON or OFF the Reverse L-N Polarity (see below)
With “Expert mode” switched ON, the testing advisory messages, normally displayed during testing, are disabled.
With “Expert mode” switched OFF, all warning and advisory messages are displayed. The Reverse Polarity function cannot be changed.
An operator with a “User” status account must seek someone with a “Supervisor” status account to enable these features.
It is recommended that only those operators that are experienced in using the PAT400 enable “Expert mode”.
To add “Expert” privileges to an account:
1)
Use the arrow keys to select the “Expert Options” from the User menu.
2)
Press the OK key to enable or disable the feature.
3)
Press the SAVE
Hotkey to save the change.
If the Feature is disabled, the Expert mode check box will be grayed out.
Reverse L-N Polarity (Only available in some models)
Refer to section 12 Reverse L-N Polarity.
11.3.2 Changing the default Supervisor account
The factory set user account name is called “default”. This can be changed if required, see section below
To change the default account name:
1)
From the HOME screen use the RIGHT arrow key to select the “Users” tab.
