Megger MFT70-US Скачать руководство пользователя страница 33

Страница: 33 / 40

www.megger.com

Setup options

Bluetooth

Pairing

Bluetooth

Pairing (PC or Laptop)

1. Turn your MFT ‘on’ to any setting and turn the smaller dial to the settings

position to enter the setup

mode.

2. Press the

button on the MFT until you see ‘StR’ appear on the display. At this point you should ensure

that ‘bt’ is displayed in larger letters on the main part of the MFT’s display.

If this is not the case use the Right Lock

/ Right Test

buttons as UP/DOWN arrows to scroll through

the options to select your chosen communication method.

IN = Internal Only

bt = Bluetooth

Only

3. Once you have selected your chosen storage/communication location, press the left hand Bluetooth

/Lock

button once to save this as your preference. The Lock icon will now stop flashing in the upper left hand
corner of the MFT’s display and disappear to indicate your preference has been saved.

4. You will now need to press the

arrow once to display the ‘bt’ setup option.

5. To enter the Bluetooth

pairing mode you will now need to push and hold down the left hand Bluetooth

Lock

button until you see two oscillating chevrons ( <> ) appear on the display and then release. The

Bluetooth

pairing will fill the first empty slot available, if there are no empty slots left, it will overwrite the

currently shown slot on the MFT’s display. If all slots are currently in use and you wish to add another, display

on the screen the slot that you want to overwrite. To do this use the Right Lock

/ Right Test

buttons as UP/DOWN arrows to scroll through all 5 slots.

6. From your PC/Laptop run the ‘Add Bluetooth

Device’ wizard.

You will be prompted during the pairing process to enter your passkey, enter ‘1234’

During the pairing process you may also be prompted to enable the ‘Bluetooth

Serial Port’.

Ensure this option is chosen if it is available.

7. Once you have clicked ‘Finish’ on the wizard on the PC/Laptop the pairing process will now be complete and

your PC/Lap-top pairing code will be displayed on the MFT. You can now turn the dial and leave the settings

position on the MFT.

Содержание MFT70-US









































Результаты поиска

Содержание MFT70-US

Отзывы:

Похожие инструкции для MFT70-US

Бренды по названию

Популярные бренды

Megger MFT70-US, Руководство пользователя

Результаты поиска

Содержание MFT70-US

Отзывы:

Похожие инструкции для MFT70-US

Бренды по названию

Популярные бренды