www.megger.com
28
Setup options
Test will not start
“CON”
-Wrong connection to instrument.
“hot”
-Internal resistors are too hot. Also shows thermometer.
“Hot”
-Internal heat sink is too hot. Also shows thermometer.
“VOL >280V” (for example)
-Supply voltage is too high.
“L-N <48V” (for example) -Voltage on terminals is too low for L-N loop test
“L-E <48V” (for example) -Voltage on terminals is too low for L-E loop test or GFCI test
“FRE <45”
-Supply frequency is too low for loop test or GFCI test
“FRE >65”
-Supply frequency is too high for loop test or GFCI test
“NO REF”
-Loop R1 and R2 test attempted without having previously done a Zref test.
