28
Insert end of high pressure hose coupler into grease fitting as shown (should seat squarely into fitting).
Depress trigger, activating grease gun.
Remove hose coupler from grease fitting by
There should now be grease dispensing
pulling sideways as shown.
through hose and coupler.
EXPELLING AIR POCKETS
ATTENTION
1.
Air pockets in the lubricant cartridge cause the gun to lose its prime.
2.
Withdraw the plunger rod from grease tube assembly cap and engage it with the plunger by rotating the
plunger handle. Exert force on the plunger handle while holding down the vent valve.
3.
Pull the gun trigger in short bursts until all trapped air is expelled. Disengage the plunger rod from the
plunger by rotating the plunger handle. Push the plunger rod into the grease tube assembly.
4.
If step 2 fails, unscrew the grease tube assembly 1-1/2 turns from the pump assembly.
5.
Exert force on the plunger handle until lubricant oozes from the grease tube assembly and the pump
assembly interface.
6.
Tighten grease tube assembly into the pump assembly. Disengage the plunger rod from the plunger by
rotating the plunger handle. Push the plunger rod into the grease tube assembly.
