27
by depressing lock lever. Push the plunger rod into the grease tube assembly.
FILLING GREASE GUN FROM A FILLER PUMP
1.
Pull back on the plunger handle until the plunger rod is fully extended.
2.
Insert the gun filler nipple into the filler pump socket.
3.
Operate the filler pump to fill the container.
4.
When you see the plunger rod fully extended (rod is extended about 20 cm (8 inches), the grease tube
assembly is full. Disengage the plunger rod by depressing lock lever.
5.
Push the plunger rod into the grease tube assembly.
RELIEVING THE AIR
With grease in the grease tube assembly, press the gun trigger until
grease flows from the hose. Use the vent valve to expel any
remaining air pockets.
PRESSURE RELIEF VALVE
Pressure relief is factory preset at about 690 Bar. If back pressure
in the grease line exceeds the preset limit, grease will then be
expelled from this valve to reduce risk of motor overload and limit
excessive grease pressure in grease hose. Do not exceed
specifications or alter gun to perform beyond ratings. Such misuse
will void warranty and can cause possible injury.
CAUTION:
Do not adjust relief pressure above 690 bar
GREASE GUN OPERATION
Insert fully charged battery pack as shown.
