10
SETUP (Continued):
PAIRING WITH BLUETOOTH HEADPHONES
AND SPEAKERS
Optional: Replace Paired Headphone
Once the maximum of two connected headphones has been reached
(as indicated by two solid blue lights on top of the
Connect
), additional
headphones or other Bluetooth receivers can be paired in place of either
of the connected headphones.
Follow the instructions found in the “Pairing a 2nd Headphone” section to
replace one of the currently-paired headphones with a new device. Use
pairing button “A” to replace the headphone paired in slot A and pairing button
“B” to replace the headphone paired in slot B.
SUBSEQUENT USE –
RECONNECTING HEADPHONES
The
Connect
will remain connected until either the headphones or speakers
connected to it are turned off or taken out of range. It is not necessary to turn
off the
Connect
or devices after each use except to conserve battery (note:
when the
Connect
is plugged into USB power, it does not use the battery).
Previously paired Bluetooth devices will reconnect automatically once turned
back on. The
Connect
will not initiate reconnection. If the
Connect
itself is
turned off, it is recommended to turn it back on first, prior to turning on the
paired devices so that it can accept the incoming Bluetooth connection from
the devices.
If your headphones or speakers are turned on before the
Connect
, it may be
necessary to turn them off and then on again to reconnect.
Note:
It may take up to 60 seconds for audio transmission to start after
devices re-connect.
