12
FACTORY RESET / CLEAR MEMORY
The
Connect
can be reset by holding pairing button “A” on the right side of
the unit for approximately 5 seconds until the blue indicator light begins to
blink. The unit will enter pairing mode and previously paired devices will be
cleared from memory.
LED INDICATOR LIGHTS
The
Connect
has a green power/charging indicator light on the rear of the
unit and two blue indicator lights on the top. They indicate the status of the
headphones as follows:
Indicator Light(s)
Connect
Status
Green power indicator light on
(USB Power plugged in)
Battery full
Green power indicator light pulsing
slowly
Charging
Green power indicator light on
(USB Power not plugged in)
On
Green power indicator light blinking
rapidly
Low battery
Blue light blinking
Pairing mode active
One solid blue light
One headphone is connected
Two solid blue lights
Two headphones are connected
STEP 2.
ADJUST HEADPHONE VOLUME
