Page 44
Table N. 15-
Problems and solutions
Description of the problem
Cause
Solution
One control does not work; it’s
not possible to adjust height or
sections.
The bed is not
connected to the power
supply
Check power supply
One control does not work; it’s
not possible to adjust height or
sections though the bed is
connected to the power supply.
The function is blocked
on the nurse blocking
facility
Check and unblock the
movements
The bed vibrates
Call Technical service
Blocking system does not work
Call Technical service
Wheels do not brake
Brake system is worn
Change wheels (call
Technical service)
Wheels don’t turn correctly
Dirty wheels
Clean wheels
Do not try to repair the electric motors during malfunction!
Do not open the motor protection case or the protecting cover of the
power supply!
21)
Storage
For a correct storing of the bed it is recommended:
-
Disconnect the bed from power supply
-
Remove accessories (IV pole, monkey pole, etc.) if there is any.
-
Cover bed and accessories in a way that plastic components and painting wont’
be damaged.
Storing conditions must be the same of the operative environment.
Before transporting the product, be sure that it is correctly packed with
bubble film or carton box. In any case, avoid any overloading or factor that
can damage the product.