Medion LIFE P13225, Руководство по эксплуатации

Страница: 48 / 78

48
Menu option Setting
ANALOGUE FINE TUNE
Here you can fine-tune analogue channels.
SATELLITE SETTINGS
SATELLITE LIST
Display satellite list
Use the

buttons to select a satellite from the
list. Press the
O K
button to call up the
ADD, EDIT
and
DELETE
options.
ANTENNA
INSTALLATION
In this section, you can change the antenna settings
and search satellites for new channels. Select a sa-
tellite and press the OK button. Then the
TRANSPON
DER LIST, SCAN FOR SERVICES, SAVE AND EXIT
and
CON
FIGURE LNB
options appear for further editing. Under
CONFIGURE LNB
you can make and save settings un-
der
LOWER LNB OSCILLATORS
and
UPPER LNB OSCILLA
TORS SAVE
. The
RESET
option can be used to reset
all values to the default settings
SATELLITE CHAN
NEL TABLE
This menu item allows you to export or import the
existing satellite station list. Connect a removable
storage medium (USB stick) to save the satellite stati-
on list onto it or update the list from the storage me-
dium.
INSTALLATION SET
TINGS
Here you can make additional installation settings.
STANDBY SEARCH
If the function is set to
ON
, the TV will search for avai-
lable stations while it is in standby mode. When
the device finds new or not yet available stations, a
menu is displayed that you can use to accept or re-
ject the changes
DYNAMIC CHAN
NEL UPDATE
If you select the
ENABLED
setting, the channel list is up-
dated automatically.
SIGNAL INFORMATION
Displays further data about the received signal.
FIRST TIME INSTALLA
TION
This function correlates with the initial installation steps that occur after
switching on for the first time.
Carrying out the initial installation again will reset all settings back
to the Factory defaults, including the PIN.
10.4.6. System menu
As soon as you select the
SYSTEM
menu using the

buttons, the direct links for the
SLEEP TIMER, AUTO TV OFF, SUBTITLE
and
AUDIO LANGUAGE
appear above for faster proces-
sing. You can use the
SLEEP TIMER
to programme the device to switch off automatically.
You can set the time in 30-minute increments (maximum 2 hours). As soon as the setting is
made, the sleep timer countdown begins. Select
OFF
to deactivate this function.