Medifab Spex Wonderseat, Руководство пользователя

Страница: 38 / 52

38
Setting up the Wonderseat
Note 1 , to alter the arm supports depth, slide the arm support to it's
fully wide position to enable forward/back movement as indicated
below. The arm supports can be removed via the quick release
for forward/back adjustments. It is recommended that this be
done initially to familiarise caregiver/therapist with the method of
adjustment.
.
Arm Supports
Width, Angle and Depth Adjustment
All typical arm support
adjustments can be made by
loosening the screws indicated
to the right.
The upper green pair of screws
control the arm supports angle,
width and depth and can be
accessed by unzipping the
cover.
The lower blue pair of screws
allow the height of the arm
supports to be adjusted.
Unzip the arm support cover to provide access to the pair of screws
under the arm support plate then loosen the screws enough to allow
the arm support to be moved freely.
Make the necessary modifications to the width
(A)
1
, angle (B) or
depth (C)
2
of the arm supports then re-tighten the screws fully.
A
B
C
Note 2 , the depth of the arm supports can also be modified by
altering the side support depth plate (G) as described in the Pelvic
adjustment section. However it is important to note that doing so
will also modify the pelvic position and thus will also require it to be
checked/modified.
To reduce the possibility
of arm entrapment
minimise the gap
between the rear of the
arm supports and the
back support.
FIG 7
FIG 8
G