Medifab Spex Wonderseat, Руководство пользователя

Страница: 34 / 52

34
Setting up the Wonderseat
.
.
Lateral Trunk Supports
Swing Away
Pull back the lateral trunk cover (A) to
reveal the quick release slide button (B)
and slide forward. This allows the lateral
trunk to be swung out for clearance
during transfers. Ensure to do up the
cover in swing away position as the
Velcro can damage the Back Support
B
A
Height
This method of height adjustment allows the lateral trunk height to be
set independently of the lateral trunk width/angle.
Loosen the two cap screws a few turns (C) as well as the wing-nuts
(D) and then move lateral trunk to the required height. Fully re-tighten
screws and wing-nut.
Note, to avoid backrest height moving perform this adjustment one
lateral trunk at a time
C
D
WARNING
1) Take care when releasing the lateral trunk swing away ensure there is no lateral
trunk load on it because your finger may get crushed on the backrest tubes
2) Keep fingers clear of the inside of the lateral trunk swing away when re-locking
because there is a potential pinch point with the hinge angle closing