Medifab Spex Wonderseat Скачать руководство пользователя

Страница: 8 / 52

Before Starting

•

Always read the instructions before use.

Failure to follow instructions may impair use, impede

function and more importantly, may affect the users or caregivers safety

•

Materials and foam

SPEX Wonderseat seat cushion and back support meet the requirement of ISO 7176-16: Wheelchairs

– resistance to ignition of postural support devices.

In rare cases the Neoprene fabric and Lycra fabric may cause skin irritation for people with sensitive

skin. If you experience any irritation of the skin consult with your health care professional.

•

Compatibility

. The SPEX Wonderseat is only designed to be used with Bingo-OT seat unit.

•

Do not add

any other accessories other than those supplied by Medifab to this product.

•

Weight Capacity

Basket   3kg
Tray     5 kg
User    35kg
Seat Unit size 1 and 2

50kg

Mobility Base size 1 and 2

60kg

Seat unit max load of 50kg comprises of the total weight of the user and additional accessories

attached to seat unit eg tray, Wonderseat components.

Mobility base max load of 60kg comprises of the total weight of seat unit and any other accessories

attached to the mobility base. eg basket.

•

Service or repair

on the SPEX Wonderseat must only be carried out by a Medifab authorised

service person.

•

Service or repair

on the Bingo-OT/COBRA Base must only be carried out by a Hoggi GmbH

authorised service person. Any service or repair carried out by any other person will invalidate the

guarantee and Medifab cannot accept any liability for injury or damage thus caused.

Содержание Spex Wonderseat





















































Результаты поиска

Содержание Spex Wonderseat

Отзывы:

Похожие инструкции для Spex Wonderseat

Бренды по названию

Популярные бренды

Medifab Spex Wonderseat, Руководство пользователя

Результаты поиска

Содержание Spex Wonderseat

Отзывы:

Похожие инструкции для Spex Wonderseat

Бренды по названию

Популярные бренды