Medifab Spex Wonderseat Скачать руководство пользователя

Страница: 42 / 52

Setting up the Wonderseat

The SPEX Wonderseat Back Support has been designed to

accommodate postural asymmetries and adapt to different

morphologies. This guide shows how the inner section of the SPEX

Wonderseat Back Support can be contoured. Each cube compartment

contains 2 cubes. These may be removed or added as required with a

maximum of 5 cubes per compartment.

Note 1

, an extra set of 10 firmer cubes are also provided with each

back support.

Note 2

, the back support and the contouring foams can be kept

and reissued to another user as per the reissue section within this

manual.

Note 3

, record the number of cubes used in each pocket for

reference.

Contouring the Backrest

Unzip Back Support cushion outer cover, release the 2 Velcro tabs

(B)

and lean the user forward (depending on user capabilites) to remove

the inner contouring section of the Back Support

(A)

(the cover will

remain secured to the backrest) and replace with pillow. You can now

remove or add layers of contouring cubes to

(C)

suit the users needs.

Now the contouring section can be changed to suit the users posture.

Once finished, remove the pillow and reinsert the inner contouring

section.
Lean the user back.

Contouring the Back Support

WARNINGS

1. Two people are required for this adjustment. Before doing this adjustment, retrieve a soft head

pillow or similar to replace Back Support inner section while it is being modified.
2. The second person must remain with the wheelchair user to support them and keep them safe

from falling.
3. Ensure the user has the hip belt fastened.
4. The cubes must always face the rear of the Back Support.

Содержание Spex Wonderseat





















































Результаты поиска

Содержание Spex Wonderseat

Отзывы:

Похожие инструкции для Spex Wonderseat

Бренды по названию

Популярные бренды

Medifab Spex Wonderseat, Руководство пользователя

Результаты поиска

Содержание Spex Wonderseat

Отзывы:

Похожие инструкции для Spex Wonderseat

Бренды по названию

Популярные бренды