Medifab Spex Wonderseat, Руководство пользователя

Страница: 39 / 52

39
Setting up the Wonderseat
E
D
.
Loosen the pair of screws
on the arm support height
bracket, raise to required
height then re-tighten fully.
Height Adjustment
Extended Width Arm Supports
It is possible to provide a greater width arm supports position
than standard by inverting the arm supports height bracket (F) .
It is important to note however that the extra wide position will
not allow the seating system to be used in the reverse position
as it doesn't have sufficient clearance with Bingo EVO frame.
Remove the arm supports/pelvic with the quick release.
1) Remove the screws (blue FIG 9) that secure the arm supports
height bracket (F) with the washers, T-nuts and plastic spacer block (E)
and place to one side for re-installation. Rotate this bracket and arm
support 180° and reattach spacer block with fasteners in the order
they were removed.
2) Unzip the arm support pad cover and remove arm support mount
screws (green FIG 11) with washers, rotate the arm support so it is now
forward facing and replace all fasteners and washers in the order in
which they were removed. Set arm support to the desired position, fully
re-tighten all fasteners and re-zip cover.
1
2
FIG 10
FIG 11
F
FIG 9