Medicap 006.100, Руководство по эксплуатации

Страница: 16 / 32

16
5. Cleaning
Turn off the device and pull the plug from mains
before cleaning.
The external box may be cleaned with custo-
mary cleaning agents. Do not, however, use any
caustic, scratching or acidic cleaning agents.
Do not bring water into the device’s interior.
Daily
Rinse the nasal canula with clear, warm water.
When an autoclavable effervescent humidifyer
is used it should be cleaned, respectively autocla-
ved, according to the instructions given by the
producer of that autoclave effervescent humidify-
er. Non-observance of the instructions can lead to
a contamination of the effervescent humidifyer.
Option I
Clean Ionization Head
Unscrew ionization head and rinse with clear,
warm water. Boil out once a week for 10 to 15 mi-
nutes clean in dishwasher at maximum tempera-
ture. Leave to dry afterwards. The mask and the
ionization head can be treated with the desinfec-
tion spray offered. Use only dry ionization heads.
Symptom Cause Remedy
Compressor off Device became too hot Let device cool off for 30 min.,
Display: Temperature due to wrong placing place correctly, turn on again
Interval sound Device became too hot because Clean filter fleece and turn on again
coarse dust filter is blocked
Device defect
Call service
Compressor off Display: Coarse dust filter blocked Clean filter fleece and turn on again
Pressure too low
Interval sound
Intake filter blocked Call service
Device defect Call service
Compressor off Display: Device defect Call service
Pressure too high
Interval sound
Compressor off Display: Hose connection Call service
Column-valve valve-column not tight
Device is running Display: Ionization head not screwd Screw on ionization head correctly
Check Head on correctly
Interval sound
Device is running Ionization head is wet Dry ionization head
Display: Ions not OK
Interval sound
Device defect Call service