medemagroup MC 1124 Adult Скачать руководство пользователя страница 35

Страница: 35 / 92

25°

300

60°

40°

User guide 2433-2019-B

35 of 92

Version 2.0.1/2022

Medema A/S

Securing to vehicle floor with 4 point straps

For wheelchairs heavier than 85 kg, it is recommended to use an

ISO 10542-1 compliant WTORS (Heavy Duty System), which is

rated for the total weight of the wheelchair including any additional

equipment. If using a Heavy Duty system, use 4 straps to secure

the wheelchair, 2 straps at the front and 2 straps at the back.

The MC 1144 is tested with the Dahl Engineering 4-point heavy

duty system, which is approved for the chair’s total weight includ

ing all accessories.

Never use equipment that is not marked with ISO 10542

The belts must always be attached to approved fittings in the

vehicle and the four eyes welded to the MC 1144.

The belts MUST be attached within the angles shown in the pic

ture for optimum safety.

MC 1144 meets the requirements in relation to DS/ISO 7176-19-

2022 for a user weight of up to 136 kg.

When load straps are fitted, the angles should fall within the pre

ferred angles shown below.

Dimensions in mm

Front attachment points

Содержание MC 1124 Adult





























































































Результаты поиска

Содержание MC 1124 Adult

Отзывы:

Похожие инструкции для MC 1124 Adult

Бренды по названию

Популярные бренды

medemagroup MC 1124 Adult, Руководство пользователя

Результаты поиска

Содержание MC 1124 Adult

Отзывы:

Похожие инструкции для MC 1124 Adult

Бренды по названию

Популярные бренды