medemagroup MC 1124 Adult Скачать руководство пользователя

Страница: 31 / 92

User guide 2433-2019-B

31 of 92

Version 2.0.1/2022

Medema A/S

The MC 1144 is supplied with sealed, maintenance-free bat

teries that do not normally generate gas and do not need to be

topped up with water.

Note!

Unsealed batteries must NEVER be installed in the MC 1144.

If charging is to take place outdoors, an enclosed charger with

out a fan should be chosen.

Only use chargers designed for charging dry maintenance-free

GEL or AGM batteries.

Max. charging current 12 A.

The charging cable must NOT be extended.

New batteries can be purchased from Medema A/S.

Note

If the battery is 100% discharged (deep discharge), it is not pos

sible for the charger to start charging the battery.

There is no warranty on batteries that have been damaged

as a result of deep discharging.

Battery disposal

Used batteries must be disposed of through your supplier or at

a recycling centre.

Take care in handling any leaky batteries, as they contain cor

rosive acid bound into the gel mass.

INFO: New batteries can be purchased from Medema A/S.

Содержание MC 1124 Adult





























































































Результаты поиска

Содержание MC 1124 Adult

Отзывы:

Похожие инструкции для MC 1124 Adult

Бренды по названию

Популярные бренды

medemagroup MC 1124 Adult, Руководство пользователя

Результаты поиска

Содержание MC 1124 Adult

Отзывы:

Похожие инструкции для MC 1124 Adult

Бренды по названию

Популярные бренды