medemagroup MC 1124 Adult Скачать руководство пользователя

Страница: 32 / 92

User guide 2433-2019-B

32 of 92

Version 2.0.1/2022

Medema A/S

Charging

Plug the cable into the control box on the wheelchair.

Plug the charger into the outlet or switch it on.

Use the indicator lights on the charger to check that charging has started.

When charging has finished, switch off or unplug the charger, and then

remove the charger cable from the control box.

The actual battery indicator on the vehicle will show “full” after

charging for a short time. However, the batteries are not fully

charged until the indicator on the CHARGER turns green.

Note!

New batteries reach full capacity after approx. 20 discharge/

charge cycles.

Please note that the capacity of the batteries will reduce over

time and at low temperatures. Battery capacity at -10°C is half

that at +20°C.

If the MC 1144 is not going to be used for an extended period,

charging once a month will suffice.

Note!

The charger must NOT be placed on the seat during charging.

Charging while the vehicle is switched on

•

The battery indicator will flash during charging.

•

After charging, the battery indicator will flash for about 1 minute

after the charging cable is unplugged.

Содержание MC 1124 Adult





























































































Результаты поиска

Содержание MC 1124 Adult

Отзывы:

Похожие инструкции для MC 1124 Adult

Бренды по названию

Популярные бренды

medemagroup MC 1124 Adult, Руководство пользователя

Результаты поиска

Содержание MC 1124 Adult

Отзывы:

Похожие инструкции для MC 1124 Adult

Бренды по названию

Популярные бренды