medemagroup MC 1124 Adult, Руководство пользователя

Страница: 43 / 92

User guide 2433-2019-B 43 of 92 Version 2.0.1/2022
Medema A/S
Secure screws with Locktite 222 onto treads on all screws.
Screws must be engaged with 9 mm. Tighten to a torque of 16-
18 Nm
Mount the batteries, the hoist and tilt module, the seat and
legrests again. Check that all functions are working okay.
The docking station are
mounted in the car bot -
tom. It must be carried
out by an authorized
workshop.
Move the chair over the
docking station, and it
will grab the lock plate. A
click sound mean it is in
place and secured.
To release the chair, use the electric release button that is in -
stalled in the car in the operating area. If the car is turned off, or if
it just needs power, there will be a manual release lever as well.
WARNING!
Do not use any other screws than those supplied from Dahl
Engineering (part #502800 which is quality 14.9, torx key size
27). Standard countersunk M8 screws will not be strong enough
in the event of a collision.
Be aware to point the locking plate
in the right direction. The lock plate should point forward.
Distance plate
Lock plate