medemagroup MC 1124 Adult, Руководство пользователя

Страница: 83 / 92

User guide 2433-2019-B 83 of 92 Version 2.0.1/2022
Medema A/S
Reconditioning
When preparing a MC 1144 for a new user it is important to
check the following.
• Transaxle - clean and check for leaks. Check bearings. Check
brushes in the motors.
• Tyre pressure (see technical data).
• Condition of tyres (check for cracks and abnormal wear).
• Cables (check that the cable insulation is undamaged and that no
cables are trapped, secure loose cables, check for signs of heat
damage).
• Control unit with joystick (check for moisture, function test).
• Batteries (load test, check battery terminals and strap).
• Charger (check that the charger is supplying the correct charge
voltage/current).
• Fuses (function test).
• Moving parts like leg supports, etc. (lubricate with acid-free oil).
• Check wheels (pivot wheels, anti-tilt wheels and central wheels).
Clean and check for play.
• Check the brakes/disengagement.
• Screws and washers (check screws/washers everywhere on the
wheelchair. Check they are tightened properly and that they are
intact).
• Hoist and tilt (check for breaks on the frame, hoist and tilt. Check
that there are no cracks or breaks - must not be welded).
• Frame (check for cracks, remove any rust, repaint. Must not be
welded).
• Switches (check the switch controlling the speed reduction when
the hoist is activated).
• Accessories (check the accessories, manual and electronic. Re -
place any faulty finger screws or handles).
• Test drive (test all functions at their maximum settings. Test drive
the wheelchair under maximum load).
• The user instructions must be provided in a plastic folder on the
seat.
If the panels have lost their shine:
• Wipe the panels dry with a damp cloth.
• Wax them with car wax.
Further information: See the Service Instructions.