Medema Mini Crosser M1 Cabin, Руководство по обслуживанию

Страница: 11 / 66

Service manual P9-0151-S 11 of 66 Version 1.0.3/2018
Medema Production A/S
General care and maintenance
A Mini Crosser M1 Cabin does not require much maintenance.
It should be kept in a generally good condition, however. The
following should be checked regularly:
Š
Tyre pressure (if pneumatic tyres are fitted)
Š
Tyre wear
Š
Keep the control panel, the charging socket and the electronics
box under the seat dry.
Š
Battery charging
Never wash the Mini Crosser with a high-pressure cleaner or
direct water jet! This could damage the Mini Crosser’s electronics.
To keep the Mini Crosser in good condition safety-wise, we
recommend the following regular checks:
Daily:
Š
Test the indicators and driving lights before using the Mini Crosser
in the dark or poor visibility.
Every three months:
Test the brakes and motor disengagement
With the disengagement lever up, it must not be possible to
push the Mini Crosser.
Š
Test the brake disengagement function.
With the brake disengagement lever down, the scooter must
not be able to go when the accelerator is activated. The battery
indicator should flash error 9.
When the disengagement lever is up and the scooter has been
switched off and on, the scooter should be able to go again. It
must not be possible to push it.
Š
Test the accelerator.
With the scooter turned off, activate the accelerator while turning
the scooter on. The scooter must not be able to go. The battery
indicator should go up and down.
With the scooter turned on, press the accelerator forward a touch.
When it is released, the scooter should stop completely and the
brake should click. It must not be possible to push the scooter.
Perform the same test again, but pressing the accelerator back.