Medema Mini Crosser M1 Cabin, Руководство по обслуживанию

Страница: 17 / 66

Service manual P9-0151-S 17 of 66 Version 1.0.3/2018
Medema Production A/S
Service summary for Mini Crosser M1 Cabin
Area Component Check and remedy
Suspension and
wheels
Rear suspension Check whether the rear of the
scooter is drooping. The rear wheel
must not rub on the mudguard with
a load on the seat. Replace the
shock absorbers/springs behind
the batteries. See the Spare Parts
Catalogue.
Check the shock absorbers for oil
leaks.
Check that the swivel axle/transaxle
is securely mounted. Retighten or fit
bolts/nuts.
Check that no cables
can be trapped by
moving parts.
Fit cable ties.
Check the wheels Check the fastenings and the
condition of the rims.
Check the tyre
pressure and tread.
Recommended tyre pressure: 2.8 bar
(50 psi)
The minimum tread depth for good
grip is approx. 1 mm.
See the Spare Parts Catalogue for
disassembly. NB! The rear and front
wheels on the 4W MUST always be
removed using the five bolts. NEVER
undo the actual flange using the bolt
in the centre. See the Spare Parts
Catalogue. NB! ALWAYS let the air
out of the inner tube before taking a
wheel apart!
Check that the
handbrake is working.
Lubricate the lever arm on the brake
hub with acid-free oil. Adjust the
cable length using the adjusting
nipple. If parts are defective: See the
Spare Parts Catalogue.
3W: Front fork.
Suspension and
straightness.
Check that the front fork can bounce.
Is it crooked?
Is there an oil leak?
If there is a defect that needs to be
repaired, replace the entire front fork.
See the Spare Parts Catalogue.
3W: Front wheel. Check the ball bearings for play and
wear.
4W: Front suspension. Check that the front wheels do not hit
the underside of the front mudguards.
Check that the rubber dampers are
secure. They should just touch the
axle beam. See the Spare Parts
Catalogue.
Check that the T-suspension block is
working and does not droop.