16
This mode contains two parts: the drum pad trigger settings and drum
module settings.
The Drum Pad Trigger Settings
As a professional drummer, you may be very pleased to set your drum
triggers carefully corresponding to your playing habits and feelings,
making your performance more interesting and professional. At the
meantime, your digital drum will be more operability.
1.
Press the [UTILITY] button, the LCD will display the UTILITY menu.
2.
Press the [PAGE +] / [PAGE -] button; select the trigger parameters
that you want to edit.
The drum pad trigger settings are as bellow:
Utility Mode (UTILITY)
Parameter
RIM SENS
SENSITIVITY
THRESHOLD
XTALK
CURVE
RETRIG
CANCEL
HH CLOSE
SPLASH
Value
1~5
1~16
1~16
1~16
1~16
1~6
1~16
0~2
Description
You can adjust the sensitivity of the pads to accommodate your personal playing habit.
Higher sensitivity allows the pad to produce a loud volume even when played softly.
Lower sensitivity will keep the pad to producing a low volume even when played forcefully.
Adjust the sensitivity of rim shot.
This setting allows a trigger signal to be received only when the pad is above a
determined dynamic level (velocity). This can be used to prevent a pad from
sounding because of vibrations from other pads.
For example,
B will sound but A and C will not sound. When set to a higher
value, no sound is produced when the pad is struck lightly. Gradually raise
the “Threshold” value while striking the pad. Check this and adjust accordingly.
Repeat this process until you get the perfect setting for your playing style.
This setting avoids “crosstalk”, which means that when you play one pad you can hear a sound coming
from another pad. This can happen when two pads are installed on the same stand.
For example:
If you hit the snare pad and the tom 1 also sounds.
While striking the snare pad, gradually increase the “XTALK” value for the tom 1 pad until the tom 1 pad
no longer sounds when you hit the snare pad. If you raise the “XTALK” higher, the tom 1 pad will be less
prone to receive crosstalk from other pads.
Note:
If the value is set too high, and two pads are played simultaneously, the one that is struck less
forcefully may not sound. Be careful and set this parameter to the minimum value required to prevent
crosstalk.
This setting allows you to control the relation between playing velocity (striking force) and changes in
volume. Adjust this curve until the response feels as natural as possible. Refer to the CURVE
description.
This setting avoids “re-triggering”, which means that when you strike a pad once, maybe you can hear
two hits coming from one strike. This can happen as the pad oscillate.
While repeatedly striking the pad, raise the “Retrig Cancel” value until re-triggering nolonger occurs.
Although setting this to a high value prevents re-triggering, it then becomes easy for sounds to be
omitted when the drums played fast (roll etc.). Set this to the lowest value possible while still ensuring
that there is no re-triggering.
Adjust the position of Hi-Hat close.
If you set the parameter as “0”, it means a low Hi-Hat close position; you need to step the pedal almost
down tightly.
If you set the parameter as “1”, it means a mid Hi-Hat close position; you just only to step the pedal on
an appropriate level.
If you set the parameter as “2”, it means a high Hi-Hat close position; you don’t need to step the pedal by
too much force.
Splash sensitivity. The higher value makes the splash easier.
A
B
C
Threshold
0
5
25
75
95
100
AW_DD522_manual_G04_140310
2014
3
12
13:12:00
Содержание DD522
Страница 1: ...0 5 25 75 95 100 AW_DD522_manual_G04_140310 2014 3 12 13 11 56...
Страница 31: ...GM Backing Instrument List 31 0 5 25 75 95 100 AW_DD522_manual_G04_140310 2014 3 12 13 12 03...
Страница 32: ...MIDI Implementation Chart YES NO DD522 _G04 0 5 25 75 95 100 AW_DD522_manual_G04_140310 2014 3 12 13 12 04...