Air & Surface Steriliser System
INSTALLATION & OPERATING MANUAL REVISION: 04/2020 | page 15 of 16
Chapter 10. ON-GOING MACHINE REQUIREMENTS
Refer to Chapter 3 of this manual, relating to safety.
10.1 GENERAL CLEANING MAINTENANCE
There is little cleaning required. A vacuum cleaner may be needed to clean dust or debris accumulated on the inlet
and outlet openings.
•
Do not use a wet cloth to clean inlet and outlet openings of the unit.
•
Please be careful when cleaning is in progress, switch off all power.
•
Do not touch the quartz part of the UV lamp and the anodized aluminium air diffuser plates at all.
These plates are self-cleaning.
Chapter 11. AFTER SALES and SERVICE SUPPORT
For technical assistance, please contact Mechline
or your dealer. Please have the HyGenikx
unit model number to hand.
11.1 WARRANTY
Mechline’s air & surface hygiene steriliser system has a one year manufacturer’s warranty from the date on invoice,
against defective parts or faulty workmanship. Terms and conditions apply.
NOTE:
Lamp and battery packs are basic ‘consumable’ goods and are not subject to warranty.
11.2 SPARE PARTS
Individual parts can be replaced in all units, rather than removing the unit from site. For spare parts contact Mechline
or your dealer.
