Mechatro MTP-8100P, Руководство пользователя

Страница: 42 / 54

42/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
For example:
If you choose N value for 0, the printer will eject every paper until the last page. Last page will be holding by
the printer. When last page is holding by the printer and if new print data is transmitted to the printer, the
printer will eject the last holding page.
If you choose, N value for 5, the printer will eject every paper until the last page. The printer will hold last
page for 90sec then if not taken, the printer will retract.
If you choose N value for 14, the printer will retract every paper until the last page. The printer will hold last
page for 30sec then if not taken, the printer will retract.
FS f
n
[Name]
Select paper cut mode
[Format] ASCII FS f
n
Hex 1C 66
n
Decimal 28 102
n
[Range] 0 ≤
n
≤ 4
[Description] Selects paper cut mode n from the following table:
N
Paper Cut Mode
0 OFF
1 Half cut per PAGE
2 Half cut per DOC
3 Full cut per PAGE
4 Full cut per DOC
[Default]
n
= 3
[Example] \x1c\x66\x03 (Full cut per PAGE)
This function will allow you to select the cut mode.
Cut/Page mode will cut each page size that is chosen by you.
For example, if you send 1 job with 10 pages of print that is A4 size and if you select N value for 3, the
printer will cut each A4 size page. If you send 1 job with 10 pages of print that is A4 size and if you select N
value for 4, the printer will cut after the job is completely finished means 1 cutting.