Mechatro MTP-8100P, Руководство пользователя

Страница: 38 / 54

38/54 Page Mechatro, INC.
User Manual Rev. 1.5
MTP-850P / 8100P / 8100P3
4.3 Commands for BeginDOC
Inserting command using command typing box on driver dialogue box
You must type on the BeginDOC typing box for below commands
FS a
n
[Name]
Select page type
[Format] ASCII FS a
n
Hex 1C 61
n
Decimal 28 97
n
[Range] 0 ≤
n
≤ 3
[Description] Selects page type n from the following table:
N
Printing Speed
0 Page Based
1 Line Based
2 Black Mark Based
[Default]
n
= 0(Page Basedl)
[Example] \x1c\x61\x00 = “Page based mode”
FS b n command allows you to select page type.
If you select Page Based, the printer will cut the paper by selected page size.
If you select Line Based, the printer will cut right after the last line or image of the print.
If you select Black Mark Based, the printer will cut the paper at the black mark on the paper.
FS b
n
[Name]
Select printing speed
[Format] ASCII FS b
n
Hex 1C 62
n
Decimal 28 98
n
[Range] 0 ≤
n
≤ 2
[Description] Selects printing speed n from the following table:
N
Printing Speed
0 Slow (50mm/sec)
1 Normal (100 mm/sec)
2 Fast (125 mm/sec)
[Default]
n
= 0(50mm/sec Model), n = 1(100mm/sec Model)
[Example] \x1c\x62\x01 (100 mm/sec printing speed)
FS b n command allows you to select printing speed.