25/54 Page
Mechatro, INC.
User Manual
Rev. 1.5
MTP-850P / 8100P / 8100P3
2.4 Adjusting Near-End Sensor Position
On the right side of MRH-8200 (8inch Paper Roll Holder),
There is a near-end sensor inside the cover. The cover
A
can be easily opened by unscrewing 1 screw mark
B
in
the next picture.
When you opened the cover, you will see near-end sensor.
You can “Swing” adjust to find your suitable warning time.
2.5 Connecting to the computer
A. Using the serial (RS-232C) interface
Connect the printer to the serial port of the computer to be used.
Computer
Printer
2(Rx)--------------------------------------------------------------------------------2(Rx)
3(Tx)--------------------------------------------------------------------------------3(Tx)
4(TR)--------------------------------------------------------------------------------4(DTR)
5(SG)--------------------------------------------------------------------------------5(SG)
6(DSR)------------------------------------------------------------------------------6(DSR)
7(RTS)------------------------------------------------------------------------------7(RTS)
8(CTS)------------------------------------------------------------------------------8(CTS)
B
A
