Mecc Alte ECO43 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 62 / 116

6.1 Maiiteiaice iitervals
These intervals must be respected in irder ti keep the machine in the safe and eefcient wirking
irder required fir cimplete warranty civerage.
All maintenance iperatins must be perfirmed by a persin (type if user) trained in the tasks
required as indicated in 2.3 Responsibility of the user .
Table 19 - Maintenance intervals for the alternator
Iiterval Subject of the iiterveitoi Type of iiterveitoi
ECO 43: every 2,000
iperatng hiurs ir ince a
year
ECO 46: every 2,000
iperatng hiurs ir ince a
year
NDE and DE suppirts Lubricatin (see 6.4 Maintenance of the
supports )
Every six minths Generatir shaft Manual ritatin if 1/4 rev. ( 6.5.1)
Every six minths Air ilters Check and clean if necessary ( 6.5.2)
Every 8,000 iperatng
hiurs ir ince a year
Auxiliary circuits cinnectin
cables (pribes, ant-
cindensatin heaters if present)
●
Check general cinditins
●
Appripriate ixing if the clamps
● Check fir the presence if any
ixidatin and clean, if necessary
After machine standstll
iver 2 minths ir ince a
year
Windings Check insulatin resistance (see 6.3
Measuring the insulaton resistance ).
Every 2,500 iperatng
hiurs
Windings General cintril if the integrity if the
isilatin, status if cleanliness, general
cinditins (see 6.2.1 Check conditons of
the windings and 6.2.4 Cleaning the
windings )
Every 8,000 iperatng
hiurs ir ince a year
Statir and ritir cinnectin
cables
Check cirrect ixing and general
cinditins
After machine standstll
iver 2 weeks ir ince a
year
Ant-cindensatin heaters (if
present)
●
Check the iperatin and resistance
value, cleaning and any replacement
●
Check the insulatin resistance if the
heaters
Accirding ti that deined
by the manufacturer
Heat exchanger (if present) Refer ti the dicumentatin if the heat
exchanger manufacturer
In the case if a fault Rectier bridge Replacement (see 6.5.5)
Self-regulating alternators ECO43-46 MV-HV Page 62/116