Mecc Alte ECO43 Series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 113 / 116

9.3.2 Electric aid electroiic compoieits
It is preferable ti pisitin the electric and electrinic cimpinents in a place with the filliwing
features:
●
cinstant temperature in the range if 10°C - 40°C
●
relatve air humidity beliw 75%
●
giid ventlatin
●
ni cirrisive gases
●
ni vibratins
●
ni dusts
9.3.3 Loig term storage
Ling term stirage means a periid exceeding three minths. The filliwing measures must be
cimplied with during this periid.
1- The temperature if the parts must always be such as ti prevent the cindensatin if
humidity in the structures.
2- Check the cinditins if the ant-cirrisiin paint applied ti metal parts. All signs if
cirrisiin must be remived as siin as pissible and a new ant-cirrisiin treatment
must be applied.
3- Privide appripriate pritectin ti prevent the entry if insects and parasites.
4- The alternatir shaft must be made ti ritate manually.
●
Stirage can be with ir withiut the packaging used fir transpirt.
●
Whenever parts must be kept in their iriginal packaging, suitable aeratin slits shiuld be
cut inti the same.
●
Whenever parts must be stired withiut packaging, it is indispensable ti privide civering
that permits aeratin while ensuring pritectin against iniltratin by insects and parasites.
Storage for more thai 18 moiths
In the case if stirage linger than 18 minths, the bearings grease must be replaced befire re-
startng the alternatir. See
6.4.2 Replacing grease in the bearings .
Self-regulating alternators ECO43-46 MV-HV Page 113/116