mecalac AX 1000, Руководство по эксплуатации, Страница: 63 / 144

P070/P071/P085/P086/P100/P101 7-5
Rescue, towing, 7
lashing, lifting by crane
Figure 7-7
- The max. permissible load of the shunting and
towing coupling (7-2/2) is 4.5 t horizontally in
the longitudinal direction.
- The max. permissible load of the lashing/load-
bearing points (7-6/arrows, and 7-7/arrows) is
2.0 t.
7.1.1.2 Towing the articulated loader when
the traction drive has failed
(1) Actuate the toggle switch for the hazard flasher (4-8/13).
(2) Set the drive switch (4-10/11) to “0”.
(3) Apply the parking brake (4-9/3).
CAUTION
If the rescue location is on an uphill/downhill grade,
wheel chocks must be placed on the sloping side of
both front axle wheels in addition to applying the
parking brake.
NOTE
The preparations described in steps (4) and (5)
are only to be carried out if the rescue location
is
not on a public road:
(4) Cover the bucket cutting edge and teeth with the
bucket protector (5-4/arrow).
(5) Insert the plug of the bucket protector into the socket
(5-5/arrow, option).
(6) Lift and mechanically prop up bucket arm [e.g. by
inserting the bucket arm support (option) (1-2/arrow)] and
lower bucket arm until it rests on the bucket arm support by
actuating the lever for the working hydraulics (4-8/4).
(7) Lock the pilot valves for working and auxiliary hydrau-
lics (1-2/arrow) (rear position).
(8) Connect the tow rod to the loader to be towed (7-2/
arrow) and to the towing vehicle.
(9) Undo the fastening screw on the hydraulic oil tank
(7-3/arrow) of the right rear mudguard.
(10) Undo fastening screws in the wheel house rear right
(7-4/arrows) and pull the mudguard off to the side.
(11) Switch the hydrostatic drive motor to free oil flow
before towing. For this purpose, screw in the setscrews at
both high pressure relief valves (7-5/arrows) of the drive
pump until they are level with the hexagon nuts (size 13)
loosened beforehand. Then tighten the hexagon nuts.
NOTE
The operator of the loader is responsible that the
(optional) tool required to remove the mudguard
(items 9 and 10) and to adjust the drive pump
(item 11) is always on board the loader.