mecalac AX 1000, Руководство по эксплуатации

Страница: 38 / 144

P0700/P0710/P0850/P0860/P1000/P1010 4-10
4 Description
Figure 4-15
Figure 4-16
Figure 4-17
4.6 Removing the driver’s cab
NOTE
- Park the loader on solid and level ground.
- The engine must be turned off.
- Unlock the battery main switch (opt.) (8-36/1)
by giving it 2 counter clockwise turns.
- Immobilise the loader with the parking brake
(4-9/3).
- Have 4-strand lifting gear ready.
CAUTION
- Remove the driver’s cabin with the loader
standing horizontally and the bucket arm in the
lowest position.
- Use the intended mounting aids or other secure
working platforms when performing work above
reaching height. Do not use any loader parts, in
particular attachments, as climbing or
descending aids. Use safety harnesses when
working at very great heights.
- Use a crane capable of precisely lifting the load
in vertical direction for the conversion.
(1) Dismount the left driver’s cab door.
(2) Dismount the upper window section on the right loader
side (see also chapter 4.5. NOTE).
(3) Loosen the connecting screws between driver’s cab
lower and upper section at the front left (4-15/arrow) and
right (4-16/arrow).
(4) Loosen the connecting screws between driver’s cab
lower and upper section at the rear left (4-17/arrow) and
right (4-18/arrow).