mecalac AX 1000, Руководство по эксплуатации

Страница: 44 / 144

P070/P071/P085/P086/P100/P101 5-2
5 Operation
Figure 5-1
5 Operation
5.1 Checks before start-up
- Engine oil level (see the operating instructions for the engine)
- Brake fluid (brake hydraulic oil)
- Hydraulic oil level
- Fuel level
- Tyre pressure
- Profile depth
- Lighting system
- Seat position
- Remove the lock levers for the auxiliary and working
hydraulics pilot valves (4-8/6) if present
» only if work is to be commenced «
- Bucket arm prop [(e.g. bucket arm support (option)
(1-2/arrow)]; remove if necessary
- Articulation safeguard (1-3/arrow); remove if necessary
- General state of the loader, e.g. check for leaks
- The presence of
- a fist aid kit
- a warning triangle
- a signal lamp
must be verified.
5.2 Start-up
5.2.1 Starting the diesel engine
(1) Apply the parking brake (4-9/3).
(2) Set the drive switch (4-10/11) to “0” (starter interlock!).
(3) Turn the main battery switch (8-36/1) clockwise to the
stop.
(4) Insert the ignition key into the starter switch (4-8/7)
and turn the key clockwise to position "II“ (5-1).
NOTE
- Indicators for battery charge, parking brake,
engine oil pressure and preheating light up. The
fuel gauge, the coolant temperature gauge, the
operating hour counter and the digital clock
function.
- Start the engine in position "0“ of the drive
switch (4-10/11).
(5) Turn the ignition key clockwise to position "III“ (5-1)
after a few seconds (preheating). As soon as the engine
starts, release the ignition key.
NOTE
- If the engine has not started after two attempts,
determine the cause using the malfunction table
in the operating instructions for the engine.
- For operation at extremely low temperatures,
see the operating instructions for the engine.
- Run the engine at a low speed and do not subject
it to full load until the hydraulic oil has reached its
operating temperature after a cold start.
When a hydraulic oil filter clogging indicator
(4-11/13) (option) is present, it will go out as soon
as the hydraulic oil has reached its operating
temperature.