manualshive.com logo in svg

Mec Micro 26, Руководство оператора

Поделиться
Скачать
Mec Micro 26 Скачать руководство пользователя страница 40

Page 36

Mcro 26 - Operator’s Manual

March 2019

Transport and Lifting Instructions

Safety Information

This section is provided for reference and does not supersede any 
government or company policy regarding the loading, transport or lifting 
of MEC machinery�����

Truck drivers are responsible for loading and securing machines, and 
should be properly trained and authorized to operate MEC machinery����� 
Drivers are also responsible for selecting the correct and appropriate 
trailer according to government regulations and company policy����� Drivers 
must ensure that the vehicle and chains are strong enough to hold the 
weight of the machine (see the serial number plate for machine weight)�����

While loading and unloading, the transport vehicle must be parked on a 
level surface and secured to prevent rolling�����

Loading

Free-wheel configuration for Winching or Towing

RUNAWAY HAZARD!

After releasing the brakes there is nothing to stop machine travel����� 
Machine will roll freely on slopes�����

ALWAYS chock the wheels before manually releasing the brakes�����

The machine can be winched or towed short distances at speeds not to exceed 5 mph.

Before towing or winching the machine, it is necessary to release the brakes.

Reset the brakes after towing or winching.

Disengage Brakes before Towing or Winching

Push Down
& Hold

1

Turn to
Ground

2

ART_5029

Chock the wheels.
Turn the Key Switch to the OFF position.
Pull or turn the red Emergency Stop button clockwise to the on 
position at both the ground and platform controls.
At the Ground Controls panel, press and hold the Lift/Lower 
Switch to the DOWN position, then turn on the Key Switch to the 
GROUND position.
Hold the Lift/Lower Switch in this position until a continuous alarm 
sounds, signalling that the brake has been released.

1.
2.
3.

4.

5.

Resetting Brakes

Turn the Key Switch to the OFF position to reset the brake or press the Emergency Stop button, then 
push the Brake Release Switch to the right to reset the brake.

Secton 11 - Transportng and Lftng Instructon

Transport and Lifting Instructions

Содержание Micro 26

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды