Page 12
Mcro 26 - Operator’s Manual
March 2019
Workplace Inspection
DO NOT operate this machine until you have read and understood this manual, have
performed the Workplace Inspection, Pre-Start Inspection and Routine Maintenance, and have
completed all the test operations detailed in the Operating Instructions section�����
Inspect the workplace and determine whether the workplace is suitable for safe machine operation.
Do this before moving the machine to the workplace.
Be sure the lift is the correct machine for the job.
Be aware of workplace conditions, and continue to watch for hazards while operating the machine.
Workplace Inspection
Before operating the machine, check the workplace for all possible hazards, including but not limited
to:
Drop-offs or holes, including those concealed by water, ice, mud, etc.
Sloped, unstable or slippery surfaces
Bumps, surface obstructions and debris
Overhead obstructions and electrical conductors
Other objects or equipment
Hazardous locations and atmospheres
Inadequate surface and support to withstand all load forces imposed by the machine
Wind and weather conditions
The presence of unauthorized personnel
Other possible unsafe conditions
•
•
•
•
•
•
•
•
•
•
Workplace Inspection
Secton 6 - Workplace Inspecton
