
Page 20
Mcro 26 - Operator’s Manual
March 2019
Secton 7 - Operatng Instructons and Functon Tests
To determine the slope grade
ART_4983
Measure the slope with a digital inclinometer OR use the following procedure.
You will need:
Carpenter’s level
Straight piece of wood, at least 3.3 ft / 1 m long
Tape measure
Lay the piece of wood on the slope.
At the downhill end, lay the level on the top edge of the piece of wood and lift
the end until the piece of wood is level.
While holding the piece of wood level, measure the distance from the bottom of
the piece of wood to the ground.
Divide the tape measure distance (rise) by the length of the piece of wood
(run) and multiply by 100.
Example:
Run = 12 ft / 3.6 m
Rise = 12 in / 0.3 m
12 in ÷ 12 ft = 0.083 × 100 = 8.3%
0.3 m ÷ 3.6 m = 0.083 × 100 = 8.3%
If the slope exceeds the maximum slope or side slope rating, the machine
must be winched or transported up or down the slope. See Transport and
Lifting section.
•
•
•
•
•
•
•
•
Operation from Ground with Controller
Use extreme caution when operating the machine with the controller
from the ground
Maintain safe distances between operator, machine and fixed objects.
Be aware of the direction the machine will travel when using the controller.
Battery Level Indicator
FULL
LOW
ART_4984
Use the LED diagnostic readout to determine the battery level.