Page 26
Mcro 26 - Operator’s Manual
March 2019
Secton 8 - Mantenance
Never leave hydraulic components or hoses open����� Plug all hoses and
fitting immediately after disassembly to protect the system from outside
contamination (including rain)�����
Never open a hydraulic system when there are contaminants in the air�����
Always clean the surrounding area before opening hydraulic systems�����
Use only recommended lubricants����� Improper lubricants or incompatible
lubricants may cause as much damage as no lubrication�����
Watch for makeshift “fixes” which can jeopardize safety as well as lead
to more costly repair�����
Inspection and maintenance should be performed by qualified personnel
familiar with the equipment�����
Routine Maintenance
NEVER perform work or inspection on the machine with the platform
elevated without first blocking the scissor assembly with the
Maintenance Lock�����
See page 21 for instructions�����
IMPORTANT
The operator may perform only maintenance items on the Pre-Start Inspection
Checklist. Frequent and Annual maintenance must be performed by qualified service
technicians.
Pre-Start Inspection
Perform routine maintenance as identified in the Pre-Start Inspection Checklist
on page 28.
Frequent and Annual Maintenance
Frequent Inspection Checklists and Annual Inspection Reports must be completed by qualified
service technicians trained and authorized to perform maintenance on this machine, and must be
done in accordance with the procedures outlined in the service manual. Scheduled maintenance
inspection checklists are included in this manual for use by qualified service technicians.
IMPORTANT
In addition to the Frequent Inspection Checklists and Annual Inspection, the 30-Day
Service must be performed after the first 30 days or 40 hours of initial service. See the
Service & Parts Manual for specific instructions.
Machines that have been out of service for more than three months must have the Frequent
Inspection Checklists completed before returning to service.
