Page 12
MMAE16 - Operator’s Manual
January 2022
Secton 4 - Hazards and Safety Rules
Component Damage Hazard
Do not use the machine as a ground for welding.
Battery Safety
Burn Hazard
Batteries contain acid. Always wear protective clothing and eye wear
when working with batteries.
Avoid spilling or contacting battery acid. Neutralize battery acid spills
with baking soda and water.
Do not expose the batteries or the charger to water or rain during
charging.
ART_5651
Explosion Hazard
Keep sparks, flames and lighted tobacco away from batteries.
Batteries emit an explosive gas.
Do not contact the battery terminals or the cable clamps with tools
that may cause sparks.
ART_5651
Component Damage Hazard
Do not use any battery charger greater than 24V to charge the batteries in the chassis.
Electrocution/Burn Hazard
Connect the battery charger to a grounded, AC 3-wire electrical outlet only.
Inspect daily for damaged cords, cables, and wires.
Replace damaged items before operating.
Avoid electrical shock from contact with battery terminals. Remove all rings,
watches and other jewelry.
Tip-over Hazard
Do not use batteries that weigh less than the original equipment. Batteries are used as
counterweights and are critical to machine stability. Each battery must weigh a minimum of 100 lbs
(46 kg).
Lifting Hazard
Use the appropriate lifting techniques when lifting batteries.
