Page 30
MMAE16 - Operator’s Manual
January 2022
Transport and Lifting Instructions
Observe and Obey:
The transport environment temperature should be within: -13°F (-25°C) ~ 131°F (55°C)
Professional planning must be applied to control the movement of the machine when lifting it
with a crane or forklift.
Only qualified aerial lift operators should move the machine on or off the truck.
The transport vehicle must be parked on a level surface.
The transport vehicle must be secured to prevent rolling while the machine is being loaded.
Be sure the vehicle capacity, loading surfaces and chains or straps are sufficient to withstand the
machine weight. See the serial label for the machine weight.
The machine must be on a level surface or secured before releasing the brakes.
Only qualified forklift operators should lift the machine with a forklift.
Be sure the crane capacity, loading surfaces and straps or lines are sufficient to withstand the
machine weight. See the serial plate for the machine weight.
Brake Release Operation
Chock the wheels to prevent the machine from rolling.
Pull out the platform and emergency red Emergency Stop button to the “ON” position.
Turn the key switch to the “ground” position while pressing and holding down the “Menu Enter
Button” button on the ECU panel to enter the password input screen .
Press the “Menu Enter Button” 4 times to enter the Menu screen .
Press either the “Menu Up Button” or “Menu Down Button” button to switch to the Special mode
(“ 4. Special Mode “)
Press the “Menu Enter Button” button to display the Special mode. Press either the “Menu Up
Button” or “Menu Down Button” button to switch to the manual push menu (“ 1. Brake Release “)
Press “Menu Enter Button” button to display “long press to confirm release of brake”. Press
and hold down the “Menu Enter Button” button to show “Brake Released!” The horn will sound
signaling that all brakes have been released.
To rest the brakes, push the emergency stop switch.
If the machine must be towed, do not exceed 2.5 mph
(4.0km/h).
Securing to Truck or Trailer for Transit
Turn the key switch to the “OFF“ position and remove
the key before transporting.
Inspect the entire machine for loose or unsecured
items.
Securing the Chassis
Use chains of ample load capacity.
Use a minimum of 4 chains.
Adjust the rigging to prevent damage to the chains.
Do not exceed 30° angle as shown.
•
•
•
•
•
•
ART_5803A
•
•
•
•
•
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
8.
Secton 9 - Transport and Lftng Instructons
Transport and Lifting Instructions
