Meatest M505, Руководство по эксплуатации

Страница: 9 / 21

Process Calibrator M505 (D) MEATEST, s.r.o.
7 Operation manual v6
DIRECT VALUE ENTRY
When the key NUM is pressed, the display shows the previous value with flashing digit. This digit can be set from
the keyboard. The flashing digit will be positioned automatically. It can also be positioned with the horizontal
cursors.
RAMPS
The key RAMP activates the Ramp generation. The values at the display increment in steps selected in the Menu.
The display shows the symbol RMP .
By pressing the key RAMP again, the ramp generation will stop.
Ramp Steps selection in MENU
Press MENU . The step can be selected from firmly pre-programmed values with the vertical cursors. Confirm with
OK.
RAMP STEPS
With keys RAMP or STEP the display will increment in steps selected in the MENU.
Selection of Steps in the MENU
Press the key MENU . Use the vertical cursors to select the Step from pre-programmed values. Confirm with OK.
Selection of individual Steps
The range and the steps can be set in two memory slots FN.1 and FN.2 .
Press MENU and select
RAMP SELECT . With the key MENU and vertical cursors select the range and the steps.
Confirm with OK.
Example: Current Output 0 - 22mA
DN STEP: Display decrementing
UP STEP: Display incrementing
Individual Ramp Step scan be selected und stored
in FN.1 and FN.2.
Example: Current Output 0 - 22mA
DN STEP: Display decrementing
UP STEP: Display incrementing