Meatest M505, Руководство по эксплуатации

Страница: 6 / 21

Process Calibrator M505 (D) MEATEST, s.r.o.
Operation manual v7 4
3 Inputs, Outputs and keyboard
CALIBRATOR
Voltage and Current Outputs,
Resistance and RTD:
+ OUTPUT -
Thermocouples: Cu Terminals at the front
MULTIMETER
Voltage and Current Inputs: + INPUT -
CONTROLLER
The Functions of the Calibrator and the Multimeter are selected with the keyboard and supported by a
microcontroller. The factory settings and the calibrated points are stored in a nopn-volatile memory and remain
stored also when the instrument is switched off. The software calibration of all ranges is accessible in the
calibration menu and protected with a password. All ranges can be recalibrated via the keyboard if required.
The graphic display is divided into two windows. The upper window is shows the multimeter functions, the lower
window the calibrator. In programming mode the display shows the parameters. In graphics mode of operation the
display shows the stored input signals.
The Multimeter is always active and can be used independently from the calibrator. The ranges can be selected
with the keyboard. The current range is firm. The voltage ranges are firm 2V, 20V or 200VDC or can be set as
automatic range.
Minus Terminals of the Calibrator and the Multimeter are common
.
1 Thermocouples Connector
2 Output Calibrator
3 Input Multimeter
4 LCD-Display
5 Main Keys
6 Cursor Keys
7 Memory Key
8 Recall Graphics
9 Datalogger
10 Selection of Calibrator Output Mode
11 Function Keys
12 Charger Jack
13 USB