manualshive.com logo in svg

Measurement Computing Data Translation DT9857, Руководство пользователя

"Прибор измерения данных Measurement Computing Data Translation DT9857 доступен для бесплатного скачивания Руководства пользователя на нашем сайте. Этот мануал предоставит вам всю необходимую информацию о продукте, чтобы вы могли использовать его эффективно. Скачайте его сейчас с manualshive.com."

Поделиться
Скачать
background image

Chapter 1

20

−

Allows you to perform single-channel FFT (Fast Fourier Transform) operations, 
including AutoSpectrum, Spectrum, and Power Spectral Density, on the acquired 
analog input data. You can configure a number of parameters for the FFT, including 
the FFT size, windowing type, averaging type, integration type, and so on.

−

Allows you to display frequency-domain data as amplitude or phase.

−

Supports dB or linear scaling with RMS (root mean squared), peak, and peak-to-peak 
scaling options

−

Supports linear or exponential averaging with RMS, vector, and peak hold averaging 
options.

−

Supports windowed time channels.

−

Supports the following response window types: Hanning, Hamming, Bartlett, 
Blackman, Blackman Harris, and Flat top.

−

Supports the ability to lock the waveform output to the analysis frame time.

−

Allows you to configure and view dynamic performance statistics, including the input 
below full-scale (IBF), total harmonic distortion (THD), spurious free dynamic range 
(SFDR), signal-to-noise and distortion ratio (SINAD), signal-to-noise ratio (SNR), and 
the effective number of bits (ENOB), for selected time-domain channels in the Statistics 
window.

−

Supports digital IIR (infinite impulse response) filters.

•

QuickDAQ Advanced FFT Analysis Option

 – When enabled with a purchased software 

license, the QuickDAQ Advanced FFT Analysis option includes all the features of the 
QuickDAQ Base version with the FFT Analysis option plus advanced FFT analysis 
features, including the following:

−

Allows you to designate a channel as a Reference or Response channel.

−

Allows you to perform two-channel FFT analysis functions, including Frequency 
Response Functions (Inertance, Mobility, Compliance, Apparent Mass, Impedance, 
Dynamic Stiffness, or custom FRF) with H1, H2, or H3 estimator types, 
Cross-Spectrum, Cross Power Spectral Density, Coherence, and Coherent Output 
Power.

−

Supports the Exponential response window type.

−

Supports the following reference window types: Hanning, Hamming, Bartlett, 
Blackman, Blackman Harris, FlatTop, Exponential, Force, and Cosine Taper windows.

−

Supports real, imaginary, and Nyquist display functions.

−

Allows you to save data in the .uff file format.

•

Quick DataAcq application

 –

 

The Quick DataAcq application provides a quick way to get 

up and running using a DT9857 or DT9857E module. Using this application, you can 
verify key features of the modules, display data on the screen, and save data to disk. (Note 
that this application does not support configuring AC/DC coupling or the excitation 
current source for IEPE inputs.)

•

DT-Open Layers for .NET Class Library

 – 

Use this class library if you want to use Visual 

C# or Visual Basic for .NET to develop your own application software for a DT9857 or 
DT9857E modules using Visual Studio 2003-2012; the class library complies with the 
DT-Open Layers standard.

Содержание Data Translation DT9857

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Data Translation DT9857

Zetkama 221 User Manual preview
221
Бренд: Zetkama Страницы: 6
Facility Explorer FX Series Installation Instructions preview
FX Series
Бренд: Facility Explorer Страницы: 4
unicore UM960 Installation And Operation User Manual preview
UM960
Бренд: unicore Страницы: 25
unicore UM960L Installation And Operation User Manual preview
UM960L
Бренд: unicore Страницы: 24
fakro ZWMA Programming And Usage Instructions preview
ZWMA
Бренд: fakro Страницы: 16
e-BLEACH infinity User Manual preview
infinity
Бренд: e-BLEACH Страницы: 24
WAGNER PV 100 Translation Of The Original Operating Manual preview
PV 100
Бренд: WAGNER Страницы: 60
Ban Seok BV-322M User Manual preview
BV-322M
Бренд: Ban Seok Страницы: 9
Sensitron ST.PL4+ Installation And User Manual preview
ST.PL4+
Бренд: Sensitron Страницы: 32
FMS 109753-KIM Manual preview
109753-KIM
Бренд: FMS Страницы: 108
Glitch'd Gaming GG AIO Quick Start Manual preview
GG AIO
Бренд: Glitch'd Gaming Страницы: 12
AUMA PROFOX PF-M100 Operation Instructions Manual preview
PROFOX PF-M100
Бренд: AUMA Страницы: 48
Velleman ARDUINO VMA307 User Manual preview
ARDUINO VMA307
Бренд: Velleman Страницы: 6
Daikin BRC7C528W Operation Manual preview
BRC7C528W
Бренд: Daikin Страницы: 23
SimCom SIM7020 Series User Manual preview
SIM7020 Series
Бренд: SimCom Страницы: 13
YASKAWA E7N Technical Manual preview
E7N
Бренд: YASKAWA Страницы: 282
National Instruments NI 9760 User Manual preview
NI 9760
Бренд: National Instruments Страницы: 9
Zero COMANDO 230V User Manual And Configuration preview
COMANDO 230V
Бренд: Zero Страницы: 16

Бренды по названию

Популярные бренды

Загрузить еще бренды