Mean Green Products CXR-52"/60" ZTR, Руководство оператора

Страница: 46 / 52

45
Fig.S2
Proper Connection and Disconnection of Charger Units:
1) Connect the charger to the mower charging port with the Red Anderson Connector. (Fig.S1or S2)
Plug charger into 110-120V or 220-240V wall outlet. You will see a red light on the charger unit and
cooling fan will turn on. This will indicate the charger is functioning properly.
2) When unit is fully charged, the light will turn GREEN and cooling fan will turn off. To disconnect the
charger, unplug charger from outlet FIRST then proceed to unplug the charger from mower
charging port. IMPORTANT: IF YOU DO NOT UNPLUG CHARGER FROM WALL OUTLET FIRST, the
GREEN light will stay on and the charger may not reset for the next charge. If this occurs, unplug
the charger from the wall outlet and wait until the GREEN light turns off (NOTE: this may take up to
40 seconds). NOTE
– If you have purchased a charger with a manufacture date of January 2019 or
later, the charger will reset without having to unplug the unit from the wall outlet.
3) After charging is complete, the red charger connector can be removed form mower. If connector is
not disconnected from the mower then the safety arm on the charger connector will not allow the
mower to drive and a fault code will appear on display. Simply remove the connector from the
mower and the fault will be corrected and drives will function as normal. Refer to Figure S3.
***Always refer to the Charger Manual for more information about the proper operation of the
charger or call Mean Green Customer Service at: 513-738-4736