Mean Green Products CXR-52"/60" ZTR, Руководство оператора

Страница: 23 / 52

22
NOTE: Once the blade/blades have shut down, the red light will go to a blinking green light. This will inform
the operator that a blade/blades have shut off and will need reset by turning Deck Blades Switch Off and
then On. Operator will also see flashing GREEN lights when turning the mower deck blades off letting
operator know that all blades have shut down.
Fig. 6: Drive Control Bars –
T
O DRIVE MOWER FORWARD
, push right & left Drive Control Bars forward an equal distance.
T
O DRIVE MOWER IN REVERSE
, pull right & left Drive Control Bars rearward an equal distance.
Fig. 6
OPERATION
Safe Operating Practices
This product is capable of amputating hands and feet and throwing objects. Always follow
all safety instructions to avoid serious injury or death.
Operation
Evaluate the terrain to determine what accessories and attachments are needed to properly and safely
perform the job. Only use accessories and attachments approved by the manufacturer. Clean battery
compartment, drive motor compartment, mower deck, seat etc. of all dirt and debris. Keep unit free of grass
clippings, leaves and other debris.
DO NOT spray under seat or electric components with water to clean
unit. Do not use, solvents, hard cleaners or abrasives. Use only compressed air. Wear adequate eye and
hearing protection when cleaning the unit. Never leave a running machine unattended. Always stop on level
ground, disengage deck blade switch, place drive control bars in neutral position, turn key to off position,
remove key and disconnect battery cables by pulling rearward on
LARGE RED battery quick disconnect in
battery box compartment for any reason including emptying the catcher or unclogging the chute. Always
T
O STOP
, move right & left Drive Control Bars
to neutral, middle position and push
Bars
OUTWARD
into the neutral slots.
When going forward to slow down, pull back
gently on both Drive Control Bars.
When going in reverse to slow down, push
forward gently on right & left Drive Control
Bars.
NOTE: Always remember middle is neutral!