Mean Green Products CXR-52"/60" ZTR, Руководство оператора

Страница: 36 / 52

35
Regular Maintenance
Regular maintenance is the best prevention for costly downtime or expensive, premature repair. The
following pages contain suggested maintenance information and schedules which the operator should
follow on a routine basis. For more detailed information order the correct parts manual for your unit. Remain
alert for unusual noises, they could be signaling a problem. Visually inspect the machine for any abnormal
wear or damage. A good time to detect potential problems is while performing scheduled maintenance
service. Correcting the problem as quickly as possible is the best insurance.
Daily inspect mower for grass clippings and wire and string tangles. The underside of the mower deck may
collect a buildup of grass clippings and dirt, especially when grass is wet or has high moisture content. This
build-up will harden, restricting blade and air movement and will probably show a poorer quality of cutting.
Therefore, it should be removed routinely. To do this it will be necessary to raise and block the deck, using
jack stands or blocks, in the full up position and scrape the build-up from underneath. Some repairs require
the assistance of a trained service mechanic and should not be attempted by unskilled personnel. Consult
Mean Green Products when assistance is needed.
Torque Values
: WARNING: Particular attention must be given to tightening the drive wheel lug nuts
and blade spindle bolts. Failure to correctly torque these items may result in the loss of a wheel or blade,
which can cause serious damage or personal injury. Call your Mean Green Products Dealer for assistance.
Torque values are given below:
Ft.-lbs.
Wheel (l
ug) Nuts………65 -75
Blade spindle bolt bottom...30 Ft.-lbs. ( BLACK Motors) OR 60 Ft.-lbs. ( SILVER Motors)
Lug nuts only - It is recommended that these be checked after the first 2 hours of operation, initially, every
100 hours and following removal for repair or replacement.
Tires
It is important for level mowing that the rear tires have the same amount of air pressure. The recommended
pressures are: 12 psi in rear tires. Front tires are either no flat tires (do not require air) OR Michelin Caster
Tweels (do not require air)
Lubrication
Use SAE multi-purpose grease for front wheel bearings for no flat tires. IMPORTANT: Recommended
maintenance at the beginning of each mowing season AND every 50 hours of operation.
Fig.5A