Mean Green Products CXR-52"/60" ZTR, Руководство оператора

Страница: 16 / 52

15
Fig.1D: Drive Speed Control Switch – Allows operator to select a comfortable driving speed Low or High
depending on terrain, grass conditions, slope, operator experience etc. Push button for Lowest, Slow Speed for
inexperienced operators, for trimming around objects, buildings and other obstacles.
Always EASY DOES IT when unsure or new user to the equipment! Get comfortable with mower before pushing
button into HIGH speed!
Right Side Mower Control Panel
(With Operator Seated)
Fig.3
Fig.3:PTO Deck Blades ON and OFF Switch
: This switch engages the deck blade motors. Pull the switch
up to engage blades and push switch down to disengage blade motors. NOTE: There may be a few second
delay before blades will start!
Left Side Mower Control Panel
(With Operator Seated)
Important: Control Buttons – Left Side Control Panel (With Operator Seated)
Fig.4: Battery Capacity Indicator: Indicates battery state of charge and diagnostic information. Turn the
key to the ON position, wait 3 seconds for diagnostics to load. Display will indicate battery status and drive
conditions with READY sign or FAULT indications
. NOTE: If FAULT occurs, first reset computer by turning
key to OFF position and then to the ON position. If FAULT continues: Call your Mean Green Mowers Dealer
Immediately!
***SEE Appendix Smartec pages 16-19 for detailed Battery Capacity Indications,
Troubleshooting and Information Guide****
Fig.4