Mean Green Products CXR-52"/60" ZTR, Руководство оператора

Страница: 27 / 52

26
Children
Tragic accidents can occur if the operator is not alert to the presence of children. Children are often
attracted to the machine and the mowing activity. Never assume that children will remain where you last
saw them.
Never leave machine unattended with key in switch, especially with children present. Children or bystanders
may be injured if they move or attempt to operate the machine while it is unattended. Always disengage
deck blade switch & turn key to OFF position and remove key. Keep children out of the mowing area and
under the watchful care of a responsible adult other than the operator. Be alert and turn the machine off if
children enter the area. Before and while backing, look behind and down for small children. Never carry
children, even with the blades off. They may fall off and be seriously injured or interfere with safe machine
operation. Children who have been given rides in the past may suddenly appear in the mowing area for
another ride and be run over or backed over by the machine. Never allow children to operate the machine.
Use care when approaching blind corners, shrubs, trees, the end of a fence or other objects that may
obscure vision. Never allow children or others in or on towed equipment.
Safety start interlock system
The machine is equipped with a safety start interlock system consisting of the park brake switches, seat
switch, and deck blade switch.
Check mower safety start interlock system daily, prior to operation. This
system is an important mower safety feature. It should be repaired immediately if it malfunctions. Call
Mean Green Products immediately! The machine incorporates a separate seat switch which will stop the
drive system and deck motors when the operator is unseated for any reason while the mower is operating.
This is a safety feature designed to prevent runaway or accidental entanglement.
To inspect the system:
1. The operator must be on the seat when testing the seat switch.
2. Turn Master Power Ignition Switch to the ON position with key.
3 . Keep Drive Control Bars in neutral position.
4 . Push Deck Blades to ON position.
5. Slowly raise off of the seat. The deck blade system should stop.
6. If the deck blade system fails to stop when the operator is off of the seat
and if the cause cannot be determined, contact your Mean Green Products Dealer
immediately.
Starting your mower:
1. With key inserted, turn Master Power Ignition Switch on by rotating key clockwise to the On position AND
with arms OUT WAIT for display to read READY (if High Drive Speed Mode) OR CUT (if Low Drive Speed
Mode).
2. Check for the appropriate speed mode by switching High/Low Drive Speed Switch
to LOW position. NOTE: It is always recommended to start out in low mode/ slow speed.
3. Pull Right and Left Drive Control Bars inward until stops are contacted.
4. Pull up on PTO Deck Blades On/Off Switch to start cutting blades for mowing.
NOTE: ONLY engage blades when Drive Control Bars are in the NEUTRAL position!
NEVER engage blades when moving!!
5. Push Drive Control Bars Forward for forward motion and pull rearward for reverse motion.
Electric Brake will engage 1.5 seconds after both Drive Control Bars are returned to neutral.
Stopping your mower:
1. Return Drive Control Bars to the Neutral/Stop position.
2 . Push down on Deck Blades On/Off Switch to turn OFF the blades.
3 . Push Drive Control Bars outward into the neutral slots. After 1.5 seconds brakes will engage.
4. Rotate key in Master Power Ignition Switch counter clockwise to the OFF position.
NOTE: If operator leaves seat with key in the ON position, the unit will need RESET by
turning key switch to OFF/ON.