37
alarm selection screen
Viewing Remote Temperature and Humidity Max/Min Readings
In the Temperature and Humidity Window press the MEMORY button recalling:
•
Current temperature and humidity
•
Minimum temperature and humidity
•
Maximum temperature and humidity at the remote location.
Resetting Remote Temperature and Humidity Memory
In the Temperature and Humidity Window, press and hold MEMORY button to clear memory for
all channels.
Remote Sensor Status
The wave icon above the current channel display shows the connection status of the
corresponding remote sensor:
Icon
Status
Searching for the signals from the remote sensor
Corresponding remote sensor signal received successfully
No signals received for over 15 minutes
All Remote Sensor Signals Search Activation
The main unit can be manually activated to search for the signals from all remote sensors.
Press and hold DOWN button for 5 seconds to enable the search.
Rain Window
The main unit records the total amount of the rainfall for the last hour, 24 hours, past day, past
week and the past month. The rainfall can be displayed in inches or mm.
The daily rainfall can be programmed to alarm you if the rainfall exceeds a pre-programmed limit.
Accessing Rain Window
From the main unit: Press UP or DOWN arrow button until the RAIN icon on the display starts
flashing. From the remote control: Press .
Viewing Rain Statistics
In the Rain Window press either SET or MEMORY button to recall:
•
Current rainfall
