MDT SCN-BWM55.02, Техническое руководство

Страница: 48 / 61

Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
48
48
4.5.2.6 Basic function – Send value

Single-button function
The following figure shows the available settings:
Figure 31: Settings – Single-button function: Send value
Each time the button is pressed, the set value is always sent, either as a percentage, decimal value or
scene.
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Datapoint type
▪
1Byte DPT 5.005
Decimal factor (0…255)
▪
1Byte DPT 5.001 Percent (0…100%)
▪
1Byte DPT 17.001 Scene number
Setting the datapoint type for
the value to be sent.
Table 40: Settings – Single-button function: Send value
The value to be sent can be set according to the set datapoint type.
The values that can be set are 0 - 100% (percentage value), 0 - 255 (value) or 1 - 64 (scene).
The following table shows the available communication object:
Number
Name/Object Function Length Usage
131 Button left – Send percent value,
send value, send scene
1 Byte Sending the value.
DPT depending on the parameter setting
Table 41: Communication objects – Single-button function: Send value