Technical Manual
Motion Detector/Automatic Switch 55/63
Series .02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 • Fax: +49-2263-4588 • [email protected] • www.mdt.de
23
23
4.3.4.1 Output object: Switch
4.3.4.1.1 Switch
–
Light channel
The following settings are available for the
light channels
:
Figure 9: Settings
–
Output object: Switching (Light channel)
The parameter
Output objects for Day/Night
can be used to select whether a common object is used
for Day/Night or separate objects. In the case of "separate objects", a separate switching object is
displayed for Night mode, so that two objects are available for Day and Night. For example, the main
light can be switched on in Day mode and a small orientation light can be switched on in Night mode.
4.3.4.1.1 Switch
–
HVAC channel
The following settings are available for the
HVAC channel
:
Figure 10: Settings
–
Output object: Switching (HVAC)
There is only one output here. The
object values
for Day/Night and for ON and OFF are set directly.
D The following table shows the available communication objects:
Number
Name/Object Function
Length
Usage
0
Light channel 1 - Output 1
–
Switch
1 Bit
Switching function of the light channel for
Day/Night operation
0
Light channel 1 - Output 1 (Day)
–
Switch
1 Bit
Switching function of the light channel for
Day operation
1
Light channel 1 - Output (Night)
–
Switch
1 Bit
Switching function of the light channel for
Night operation
2
Light channel 1 - Output 2
(Additional)
1 Bit
Activation of an additional switch object
60
HVAC - Output 1
–
Switch
1 Bit
Switching function of the HVAC channel
Table 11: Communication objects
–
Output object: Switch
