MDT Technologies BE-GT20S.01, Техническое руководство

Страница: 34 / 90

Technical Manual
Glass Push Button II Smart & Push Button Smart 86
MDT technologies GmbH, Geschäftsbereich Gebäudeautomation
Phone: +49-2263-880
•
Fax: +49-2263-4588
•
E-Mail: knx@mdt.de
•
www.mdt.de
34
34
4.3.4 Slap-/Cleaning function
The following figure shows the settings for the submenu of the Slap / Cleaning function:
Figure 18: Settings – Slap-/cleaning function
The following table shows the available settings:
ETS-Text
Dynamic range
[Default value]
Comment
Cleaning function

Cleaning not active, slap active

Cleaning = long button,
Slap = short button

Cleaning = short button
Slap = long button
Activation of the Cleaning-/
Slap function and setting if
activation via short or long
keystroke
Slap function for
short/long push of
button

switch Off

switch On

toggle

send value

nothing
Setting the slap function.
Short/long key depending on
the selected concept.
Send value

2Bit DPT 2.001 Switch Control

1Byte DPT 5.001 Percent (0…100%)

1Byte DPT 5.005
Decimal factor (0…255)

1Byte DPT 17.001 Scene number

2Byte DPT 7.600
Color Temperature (Kelvin)

2Byte DPT 9.001 Temperature (°C)

2Byte DPT 9.004 Brightness (Lux)

3Byte DPT 232.600
RGB Value 3x(0…255)
Setting the data point type.
Depending on the selected
DPT, a parameter for the
corresponding value to be
sent is displayed.
Individual time for long
push of button not active
0,1 s – 30,0 s
Setting an individual time
from when a long keystroke is
detected
Display behavior of
LEDs any color Display behavior of the LEDs
when the slap function is
active
Blocking object

not active

active
Activation of the blocking
function for the slap function
Table 21: Settings – Slap-/cleaning function